Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
Troubleshooting
If there is no sound from any of the speakers, check the following: � Receiver/amplifier is on and a source is playing. � Review proper operation of your receiver/amplifier. If there is no sound coming from one speaker, check the following: � Check the �Balance� control on your receiver/amplifier. � Check all wires and connections between receiver/ amplifier and speakers. � Make sure all wires are connected. Make sure none of the speaker wires is frayed, cut, or punctured. If the system plays at low volumes but shuts off as volume is increased, check the following: � Check all wires and connections between receiver/ amplifier and speakers. � Make sure all wires are con nected. Make sure none of the speaker wires is frayed, cut, or punctured. � If more than one pair of main speakers is being used, check the minimum impedance requirements of your receiver/amplifier. If there is low bass output, check the following: � Make sure the polarity (+ and �) of the left and right �Speaker Inputs� are connected properly. If there is no sound from the center speaker, check the following: � Make sure that your receiver�s Center Channel Mode is in the �normal� or �wide� position. If it is in the �phantom� position, the center speaker will not play. � Check all connections between processor/amplifier and the center speaker.
